MGS Crusher Parts’s impact crusher wear parts are developed and manufactured according to strict standards to meet the needs of the customer in the aggregates and mining industry. Impact crusher wear parts are weighted and balanced before the delivery to the customer.

The solution is available for the most demanding crushing and recycling applications, stationary as well as mobile. Impact crusher wear parts are designed for the hardest rock and the most difficult materials in surface and underground operations.

High Chrome Blow Bars

If you’re looking to crush asphalt or other types of highly abrasive materials, you’ll want to focus on using high chrome blow bars. High chrome blow bars are a bit more brittle in comparison to the other metallurgies so it is best they are used for rock crushing only. Also, it is important to maintain a smaller feed size as to not cause too much continuous dramatic trauma which can cause cracking. The biggest concern here, however, is making sure all tramp metal is kept away from the high chrome blow bars. Too much steel or steel that’s too large can cause the bar to fracture. If properly maintained and used only for crushing rocks, high chrome bars will last the longest without having to be replaced.

High Chrome Blow Bars’s Material

Material C Cr Mn Si S p
Cr15 2.8~3.2 13~15 ≤2 ≤1.2 ≤0.06 ≤0.06
Cr20 2.8~3.2 18~22 ≤2 ≤1.2 ≤0.06 ≤0.06
Cr26 2.8~3.2 24~26 ≤2 ≤1.2 ≤0.06 ≤0.06

High Chrome Blow Bars

High Chrome Blow Bars

TIC Insert Blow Bars

TIC insert blow bars are designed for longest usable wear life for significant cost-savings. MGS Crusher Parts design features combine with proprietary high-strength alloys for greatest reliability and better bottom lines.

MGS Crusher Parts’s TIC insert blow bars are the solution to industry-wide problems of short wear life and premature breakage found in traditional blow bar design.

TIC Insert Blow Bars

TIC Insert Blow Bars

FEATURES & BENEFITS

  • Superior design – HSI blow bars with 3x-7x wear life for significant cost-savings
  • Allows for engineers to rotate the bar 3 times
  • Available in material options to suit your application – high strength alloys, manganese, titanium carbide, ZTA (Zirconia Toughened Alumina) ceramic